The Silicon Carbide Manufacturing Process

Silicon carbide has made waves in the electronics industry, from electric vehicle batteries to 5G communications networks and beyond. Due to its physical and electrical properties, silicon carbide makes an ideal material choice for high-temperature, high power/frequency environments.

Silicon carbide is typically produced via the Acheson process, using petroleum coke and silica as raw materials. Manufacturers must closely oversee both forming and sintering processes when producing this saggar type.

The Acheson Process

The Acheson Process is a production method designed to produce silicon carbide (SiC) powder for use in various applications such as cutting tools and industrial furnaces. Under this method, raw silica and carbon are combined in an electric furnace at temperatures around 2,500 C to create crude silicon carbide material, which can then be further refined through grinding processes to produce engineered SiC materials of higher quality. The Acheson Process is energy intensive and was first patented by Edward Goodrich Acheson in 1896. Today it remains one of the most commonly employed processes for manufacturing SiC in a variety of forms – offering outstanding chemical stability, abrasion resistance and exceptional high temperature load-bearing strength.

Acheson Process raw materials consist of silica sand and coal or coke. Although it is more costly than other manufacturing methods, the Acheson process remains one of the most energy-efficient ways of creating silicon carbide. To reduce costs further, Acheson processes are usually conducted near power plants with cheap electricity so as to take advantage of cheaper electricity rates – in its early days of this method’s implementation, crude silicon carbide production was located close to Niagara Falls due to readily available cheap power.

Certain carbonaceous material used in Acheson process treatment and/or functional fillers used as functional fillers have low electrical conductivity. In such instances, these carbonaceous materials may be embedded into graphitic containers intended to be placed into an Acheson oven for treatment.

Manufacturers need a thorough knowledge of how the Acheson process operates because it is such a complex procedure. Unfortunately, it operates under an unsteady thermal regime, making its kinetics difficult to pinpoint. Utilizing FactSage Software this research aims to gain more insight into dominant reactions taking place during operation as well as effects from impurities contaminating this process. In addition, an angular map is provided which further facilitates comprehension.

The Lely Process

The Lely Process is an established technique for creating silicon carbide single crystals. The method begins with polycrystalline silicon carbide ingot, which is then cut using a multiwire saw into wafers using saw marks, surface damage and subsurface defects (SSD), all of which must be eliminated prior to epitaxial growth on resulting wafers in order to meet performance specifications. A modified Lely process aims to enhance this slicing step with smoother more uniform surfaces; this should lower defect rates while simultaneously improving SiC wafer quality.

At the core of the improved Lely process is a cylindrical graphite crucible measuring 70 mms on either end with an inner diameter of 70 mms and an outer diameter of 210 mms, lined on its interior by piling lumps of starting material containing impurities not exceeding 0.002% and placed around a 25 mms mandrel. After heating to 2500 C, its silicon carbide charge disintegrates into gas-phase substances such as silicon single crystals and Si2C that then escape into the atmosphere; their emissions result in their emission into atmosphere where their temperature gradient causes them to generate multiple nuclei on its walls that form into crystal nuclei on its walls resulting in further growth – leading to crystal nuclei formation on walls of its walls resulting in multiple nuclei being formed on walls of its interior crucible wall itself.

Once nuclei are generated in the wall of the crucible, industrial grade silicon and carbon are introduced. They dissolve in accordance with their solubilities at high temperatures into solvent 12 according to their solubilities; and near the end face of source material rod 10, which contacts bottom surface of solvent pallet 12, precipitated on seed crystal 14 or surface being grown as silicon carbide precipitant.

Once the desired thickness of silicon carbide has been reached, the support rod 36 should be pulled back up because the heat expansion of solvent 12 exceeds that of thin film silicon carbide single crystal and thermal stress would quickly cause its destruction.

The PVT Process

PVT (Purity, Vapor Transport and Crystal Growth) is used as part of the manufacturing process to produce silicon carbide wafers. This method involves sublimating polycrystalline source material at high temperature and low pressure and transporting it via vaporized form to a seed crystal where its constituent particles condense and contribute to new crystal growth – creating highly pure wafers with excellent electrical properties as a result; furthermore, PVT helps prevent defects such as microfractures or dislocations from manifesting themselves within final products produced.

Chemical Vapor Deposition is similar to Physical Vapor Deposition but differs in that no chemical reactions are required for production. Furthermore, this process uses a carrier gas which does not interact with silicon dioxide particles for more precise control over deposition parameters and thinner wafer production which ultimately leads to lower thermal stress and improved device performance.

Once your electronic device has passed EVT and DVT successfully, it’s ready to move onto PVT build stage. PVT serves to test mass production yields at mass production speeds as well as produce sellable products; often stage-gated into red, orange and green stages depending on key production metrics for success; once green lights flashing indicate true mass production can begin.

To ensure a successful PVT build, all equipment and components that will be used during mass production run must be prepared and ready for final test. This includes tools, supplies, packaging, logistics, freight and quality assurance procedures used. Communication should remain open between design and manufacturing teams during this phase in order to address any potential issues immediately.

An EVT, DVT and PVT process should help you avoid costly errors caused by cutting corners in manufacturing. This step is essential in creating reliable products that exceed customers’ expectations and specifications.

The Sintering Process

Silicon carbide is one of the hardest materials on Earth, next only to diamond, cubic boron nitride and tungsten carbide. Additionally, its properties make it highly wear-resistant as it’s chemically inert against all alkalies and acids, withstanding high temperatures and voltages with no damage caused. Silicon carbide is widely used as an abrasive and in the production of steel mill grinding wheels, metal cutting tools, industrial machinery & equipment and power generation. Furthermore, silicon carbide also finds applications such as light emitting diodes & detectors within radios but these applications tend to be synthetically produced due to cost considerations.

To produce silicon carbide, raw materials must first be crushed or ground into a fine powder. Next, the powder is combined with non-oxide sintering aids such as organosilicon binders to form a pasty mixture which is compacted through cold isostatic pressing (CIP) or hot isostatic pressing (HIP).

CIP utilizes a flexible mold immersed in liquid to apply uniform pressure to compacted powder, while HIP employs uniaxial compression. Each method has their own set of benefits and drawbacks; CIP provides extremely precise products while remaining less energy efficient than alternative sintering techniques.

Sintering, the last step in the production process, involves heating a green part at temperatures lower than its melting point to weld and fuse particles together through solid-state diffusion. Sintering can take anywhere from microseconds to 24 hours depending on material and sintering method (field assisted sintering can reduce times while selective laser sintering and traditional oven processes are generally slower).

Once the sintering cycle is completed, parts are allowed to cool back to room temperature before undergoing a series of quality assurance tests, inspections and machining operations designed to ensure each part meets all necessary mechanical and physical specifications. After this rigorous quality assurance testing phase has concluded, each part will undergo quality inspections in order to meet all mechanical and physical specifications before being ready for use in industries like manufacturing, mining, oil & gas exploration or aerospace applications. Silicon carbide makes an ideal alternative to diamond or tin oxide due to its lower costs while superior hardness & chemical resistance characteristics compared with these traditional materials – providing great performance at lower costs while being superior hardness & chemical resistance.

pl_PLPolish
Przewiń do góry