Silicon Carbide Electrical Conductivity

Silicon carbide electrical conductivity is an indispensable quality in modern high-tech applications, helping drive performance and reliability without degrading function or safety. Thanks to its chemical resistance properties, silicon carbide can operate under extreme conditions without degradation that compromises function or safety.

Doping can alter the electrical conductivity of SiC by adding impurities known as dopants to its surface, producing free charge carriers (electrons or holes) which increase its electrical properties.

열 전도성

Silicon carbide is an exceptionally hard, durable non-oxide ceramic material with many desirable characteristics, including superior mechanical, chemical, and thermal conductivities, making it suitable for high performance applications. Furthermore, its ability to conduct electricity sets it apart from other ceramic materials by enabling cutting-edge electronic technologies.

Silicon carbide’s unique atomic structure allows it to be altered electrically and thermally, classified as a semiconductor material and lying somewhere between metals (which conduct electricity) and insulators (which don’t). Doping can control its ability to conduct electricity; this practice is used widely when creating semiconductor chips.

Increased impurities in silicon carbide can have a substantial effect on its conductivity, as this will create additional free charge carriers which increase conductivity of the material. Furthermore, temperature can have an impactful influence on doping success.

To increase the thermal conductivity of porous SiC, additives including nitrides and carbides may be added during carbothermal reduction. These additives may be selected based on desired thermal and electrical characteristics – adding nitrides will enhance thermal conductivity while decreasing electrical resistivity.

Improve the thermal conductivity of porous SiC by altering its microstructure. This can be accomplished via the sintering process by adding oxygen-free nitrides and carbides that improve both thermal and electrical conductivity while making the material more stable and long-term durable.

Silicon carbide stands out as a superior thermal and electrical conductor, boasting an exceptionally low coefficient of thermal expansion that allows it to efficiently disperse heat while mitigating stress or microcrack formation in high-temperature conditions. Furthermore, its high specific heat makes it capable of absorbing and storing large amounts of energy – qualities which have made silicon carbide an invaluable material in applications across instrumental, metallurgical, ceramic and electrical industries as lining blocks or bricks in blast furnaces, in the production of technical ceramics/porcelanes as well as radiation protection applications.

전기 전도성

Silicon carbide (SiC) is an exceptionally resilient industrial ceramic capable of withstanding extreme temperatures, high voltages and abrasion. As such, it makes an ideal material for high performance applications that demand increased reliability, efficiency and thermal management – such as power electronics applications where its unique physical properties have revolutionized this sector of the industry.

SiC was first discovered by Pennsylvanian Edward Acheson in 1891 and manufactured through an elaborate process involving heating silica sand with carbon sources like petroleum coke in an Acheson furnace, producing two types of crystalline silicon carbide grains in Green and Black variants; their hue indicates their purity with Green being associated with higher purity than Black.

Silicon carbide acts as an electrical insulator when in its pure state; however, doping can make it semiconductive. When doped, silicon carbide has lower resistance than either silicon or germanium to conduct electricity more easily; though not as efficiently as metals.

Conductivity of porous silicon carbide depends upon both its porosity and type of carbon present; this complex phenomenon remains poorly understood despite extensive research efforts and is still subject to ongoing exploration.

Porous SiC with low electrical resistivity (1.0x 10-5 ohm-cm) offers great potential in various electronic applications. Controlling this electrical resistance poses a considerable challenge; however, its mastery could enable innovative sensor and energy conversion technologies to emerge.

As a general rule, the conductivity of porous SiC increases with carbon content. This phenomenon occurs because more SiC particles within a porous ceramic are positively charged while most negatively charged ions reside at its surface – creating a stronger electric field at each particle’s surface and ultimately increasing conductivity and decreasing electrical resistance. As porosities increase further this effect becomes even more prominent and contributes further towards reduced resistance levels.

Mechanical Conductivity

Silicon carbide is an exceptional crystalline material with superior mechanical properties, capable of withstanding high temperatures and electrical voltages in demanding environments. Furthermore, its robust material properties help protect it against physical impacts or vibrations – ideal for electronic applications requiring high reliability in electronics applications.

Silicon Carbide, commonly referred to by its chemical formula SiC, was first discovered by Pennsylvanian inventor Edward Acheson in 1891. Although naturally found only in extremely limited amounts as moissanite gem, since 1893 mass production for use as an abrasive has taken place with grains of SiC bonded together by sintering to form very hard ceramics that can be found in applications like car brakes and clutches.

Silicon carbide’s unique chemistry also allows it to be doped with other elements to modify its performance, giving rise to either n-type or p-type semiconductor behaviour depending on which impurity is added – nitrogen and phosphorus doping yielding n-type silicon carbide, while aluminium, beryllium, boron or gallium doping producing p-type silicon carbide.

One recent study investigated the impact of porosity on the electrical conductivity of porous SiC-based ceramics. Their results demonstrated that electrical resistivity was significantly reduced for samples with higher percentages (20 wt%) of conductive phase than those with lower percentages (20 wt%); additionally, porosity affected temperature-dependent conductivity.

Other studies have explored the influence of sintering additives on the electrical properties of porous SiC. Their addition has shown significant reduction in electrical resistivity for porous SiC samples.

Researchers have observed that adding boron significantly increases the electrical conductivity of porous SiC. They have also discovered that adding nitrogen can further increase its conductivity by removing oxygen from its crystal lattice and improving electrical conductivity; in both instances their addition had no noticeable impact on its stoichiometric properties; furthermore they discovered that additives to off-stoichiometric SiC changed its electrical conductivity from n-type to p-type depending on how much was added at one time.

Electrical Resistance

Silicon carbide in its pure state acts like an electrical insulator. But with controlled doping (i.e. introducing impurities into it), its electrical conductivity changes and it becomes a semi-conductor, neither completely permitting free current flow nor repelling it completely. This characteristic makes silicon carbide suitable for components requiring high thermal stability with tailored electrical properties, such as flame igniters or semiconductor devices.

Black silicon carbide stands out not only with its impressive thermal conductivity, but also for being chemically inert and resistant to corrosion from most chemicals, making it an attractive material for producing abrasives, coated and bonded refractory materials and mechanical processing/wear applications, offering resistance against impact and shock. Furthermore, its durable strength makes it suitable for mechanical processing applications involving wear resistance as well as shock absorbency.

With its high voltage resistance that is ten times greater than ordinary silicon and superior to gallium nitride, gallium arsenide has quickly become an indispensable component in power electronic circuits. Furthermore, its ability to withstand large electrical fields while operating at elevated temperatures makes it an attractive material choice for diodes, transistors, thyristors used in electric vehicles, solar power inverters, and sensor systems.

Sintered porous silicon carbide’s electrical resistivity can be altered through doping with various additives such as Si, Al, B, V and C dopants to create energy levels near its bandgap and lower electrical resistivity. According to one study31 by researchers using submicron Ni as dopant effectively reduced both resistivity and flexural strength of mullite-bonded porous SiC.

Researchers found that samples sintered under Ar and with identical nitrides and porosity had significantly lower resistivities compared to b-SiC at the same temperature, possibly due to reduced cubic (3C) phase transformation to hexagonal (6H) phase and subsequent N2-doping during sintering under N2. This difference can be explained by changes in cubic (3C) to hexagonal (6H) phase transition as a result of Ar sintering, combined with N2-doping of a-SiC during N2 sintering during N2 sintering, along with changes in cubic (3C/3C/3H phase transition after sintering under N2.

At room temperature, the intrinsic electrical resistivity of a-SiC was found to be 2.11 x 10-3 O.cm, lower than what has been reported in literature and possibly due to difficulty measuring resistivity at elevated temperatures. Nonetheless, this resistance data from this study correlated well with thermal conductivity and flexural strength measurements from this investigation.

ko_KRKorean
맨 위로 스크롤